Want a new look for your bath, sink or tiles?

 

The Rust-oleum Tub and Tile Refinishing Kit is a simple solution that will have your bathtub, tile and sink looking new in less than a day. the epoxy acrylic formula means that it is hard wearing and long lasting.

 

How to paint bathtub, sink or tiles:

 

  1. Surface Cleaning – remove metal drains, brush/sand, and peeling paint and repair any chips, dents or damage with a patching compound. Mould and mildew will need to be removed with bleach.

 

  1. Surface Preparation – before painting you need to ensure that the surface is very clean. Prepare the surface with an abrasive tool and a lime removal cleaner. Sand the surface with a 400/600 grit wet/dry sandpaper.

 

  1. Paint Application – in a properly ventilated area mix part A and part B together. apply paint using a brush, roller or spray. Allow to dry for at least one hour before applying the second coat. Allow 3 days before exposing to water.

paint bath

The Rust-Oleum Rub and Tile Refinishing Kit is $75 at Paint Supplies Adelaide.

To find out more about painting tiles, read our Tile Paint Blog

Watch a How-To Video from Rust-Oleum

 

How to paint concrete

Concrete paint is specifically designed to cope with cars driving over it. It is a heavy duty thick paint which needs approximately seven days to cure.

What you need:

  • Concrete paint
  • Outside broom
  • Etch primer
  • Bucket of water
  • Power washer or garden hose
  • Degreaser 
  • Mineral turpentine
  • Paint roller
  • Paint brush
  • Masking tape (optional)

Painting a concrete driveway or floor

Check if there is moisture rising up through the concrete by taping a plastic bag down on the concrete and leaving overnight. If there is no moisture on the bag, then move on to the next step.
Sweep concrete to get rid of any debris.
Use degreaser on any oily spots.
Mix some etch primer into a bucket of water and scrub concrete with stiff broom, then let it sit on surface for 10 mins. 
Wash concrete with a power washer or hose and leave to dry.
Place masking tape around edges.
To get even first coat, dilute some of the paint with mineral turpentine (100 mls of turpentine per litre of paint you want to dilute).  
Paint edges with a paint brush and use a paint roller to cover the rest of the surface. 
Leave for sixteen hours to cure. 
Add a second coat of paint and leave for a full seven days to cure properly. 
A new coat of paint can be a great way to change the whole feel of a room. When choosing a paint colour for your home, it’s important to remember what the room will be used for. There’s no point in painting a bedroom bright orange when you want it to be relaxing.
 
Red can raise the energy level of a room as well as bringing people together. Painting living and dining rooms red is great for stimulating conversation, although can create a bold first impression when used in an entry way. Since it can create strong emotions it should be used in small amounts, such as a feature or accent wall.
 
Yellow encapsulates the joy of sunshine and happiness. It can also feel expansive and welcoming. It is an excellent choice for kitchens, dining rooms, and bathrooms, but is too stimulating to be chosen for a main colour scheme.
 
Blues are great for bedrooms and bathrooms as they are calming and serene. Although pastel blues can be can be chilly and unwelcoming. Warmer hues are great for social rooms like family rooms, living rooms, and larger kitchens. Although, it’s not recommended to use too much dark blues in your colour scheme.
 
Green is the perfect balance between the cheery of yellow and calming blues. It is considered the most restful colour of the eye.
 
Dark purples can be dramatic and sophisticated. It is great for adding depth to a colour scheme when used as a feature or accent wall. Lighter purples can have the same relaxing effect as pastel blues while not being as unwelcoming.
 
Orange is an energetic hue which means it would be perfect for an exercise room, rather than living or bedrooms.
 
Neutrals include black, white, grey and browns. They are great if you can’t decide or have strong accent pieces in the room. They can be used every room and work well with most colour accents. Black is best used in moderation and for adding a bit of drama to a room.
 
Now that you have a pretty good idea about individual colour choices, you’re ready to move to the next step, choosing a colour scheme. Our next blog will go through some easy tips for choosing a cohesive colour scheme.

Painting a house? We have put together a handy shopping list of the must-have items.

Don’t forget the preparation can be the difference between a great paint job and an average job

 

Sugar soap

Gap filler – around doors/windows/skirtings

Plaster filler – for holes or cracks in walls

Sandpaper / Scourer

Drop sheets

Brushes, rollers, tray, extension

Paint stripper

Masking tape

Anti-mould additive – for wet areas

Undercoat

Topcoat

House Paint for Main Rooms

 

Walls- low sheen water based paint

Ceiling – flat water based paint

 

House Paint for Wet Areas – Laundry, bathrooms etc.

 

Semi-gloss acrylic paints with anti-mould additive

OR

Enamel paint

 

Skirting Boards, Cupboard Doors, Doors and Windows

 

Bare Timber – prime and undercoat then topcoat with water based or oil based enamel (for best durability and ease of cleaning)

OR

Stain then clear coat (best with solvent based)

 

Check out some of our house paint products here

 

 

 

Painting your tiles?

 

Bathroom renovations and re-tiling can be very costly. Repainting is a great way to give your tiled areas a makeover without the prohibitive cost of retiling.

Tile painting can be a great way to get your bathroom back to its former glory, as an end of lease clean up or getting your house ready for sale. With a range of colours to choose from you can get that new bathroom look without the cost and hassle of removing tiles.

How to Paint Tiles

 

Tile paint is specifically designed to paint over porcelain, ceramic, and glass tiles. It doesn’t flake over time and needs only a reasonable amount of prep work. For best results, avoid painting tiles that receive a lot of water wear.

What you’ll need:

  • fine sanding paper (180-220 grit) or an orbital sander
  • tile paint
  • wet sponge or cloth
  • paint brush
  • primer
  • masking tape
  • Sugar soap or commercial tile cleaner

Steps

Wash all tiles with sugar soap or tile cleaner.

Clean tiles with a wet sponge and wait till it dries.

Give the tiles a light sand and wipe away any debris wit a wet cloth or sponge.

Place masking tape around edges to keep paint off of fixtures and skirting boards.

Wait for the surface to dry before applying one or two coats of primer.

Give the primer a light sand when it’s finished curing.

Wipe away dust with a wet cloth and wait for it to dry.

Paint over tiles with selected tile paint.

 

adelaide tile painting

Looking to paint your car yourself? Need spray paint?

These DIY Spray Cans are ideal for both automotive and home use.

We can mix and match your paint to your required colour, and supply it in aerosol form for automotive or home use.

Spray Paint Adelaide

If you are painting your car it’s best to be prepared. We have put together a list of the items you will most likely need for the job.

Shopping List

Sandpapers ( will need various grits 80 – 1500)

Body filler

Wax & Grease remover

Tack cloths (approximately 5 per whole car)

Rust Converter

Etch Primer

Primer (light)

Primer Filler (heavy or 2 pack)

Masking Tape

Drop Sheets

Paint Stripper

Spray gun

Paint (base coat & clear or solid colour)

Thinner (for a whole car you will need 20lts)

Cutting compound

Polish

Seam sealer

Stop putty

Underbody sealer

Ute trays heavy duty liner

POR-15 restoration products (for best results)

automotive paint

Looking to paint your boat? Depending on what your boat is made out of will depend on what you need to buy to get your pride and joy back to its former glory. 

In general, you’ll need: sandpaper, wax & grease remover, epoxy putty. If you are looking to buy a boat you should keep these items on hand always. 

For above waterline you’ll need: 

Timber                                                  

Single pack primer

Single pack undercoat

Enamel undercoat

Enamel hardener

Thinners/Turps

                                       

       

 Fiberglass/Aluminum/Steel

 

2 pack epoxy mastic undercoat

2 pack topcoat

Thinners

For below waterline you’ll need:

 

Timber

Single pack primer

Single pack undercoat

Antifouling

 

 Fiberglass/Aluminum/Steel

 

2 pack epoxy mastic undercoat

Vinyl tar

Antifouling (special antifouling for aluminium boats)

Note: ensure that correct antifouling is used to suit the speed of the boat. Also, if the vessel is stern drive or outboard, ensure antifouling is compatible (copper free) and a 2 pack epoxy base is used. 

painting timber boat boat paintepoxy paint