Want a new look for your bath, sink or tiles?


The Rust-oleum Tub and Tile Refinishing Kit is a simple solution that will have your bathtub, tile and sink looking new in less than a day. the epoxy acrylic formula means that it is hard wearing and long lasting.


How to paint bathtub, sink or tiles:


  1. Surface Cleaning – remove metal drains, brush/sand, and peeling paint and repair any chips, dents or damage with a patching compound. Mould and mildew will need to be removed with bleach.


  1. Surface Preparation – before painting you need to ensure that the surface is very clean. Prepare the surface with an abrasive tool and a lime removal cleaner. Sand the surface with a 400/600 grit wet/dry sandpaper.


  1. Paint Application – in a properly ventilated area mix part A and part B together. apply paint using a brush, roller or spray. Allow to dry for at least one hour before applying the second coat. Allow 3 days before exposing to water.

paint bath

The Rust-Oleum Rub and Tile Refinishing Kit is $75 at Paint Supplies Adelaide.

To find out more about painting tiles, read our Tile Paint Blog

Watch a How-To Video from Rust-Oleum


Painting your tiles?


Bathroom renovations and re-tiling can be very costly. Repainting is a great way to give your tiled areas a makeover without the prohibitive cost of retiling.

Tile painting can be a great way to get your bathroom back to its former glory, as an end of lease clean up or getting your house ready for sale. With a range of colours to choose from you can get that new bathroom look without the cost and hassle of removing tiles.

How to Paint Tiles


Tile paint is specifically designed to paint over porcelain, ceramic, and glass tiles. It doesn’t flake over time and needs only a reasonable amount of prep work. For best results, avoid painting tiles that receive a lot of water wear.

What you’ll need:

  • fine sanding paper (180-220 grit) or an orbital sander
  • tile paint
  • wet sponge or cloth
  • paint brush
  • primer
  • masking tape
  • Sugar soap or commercial tile cleaner


Wash all tiles with sugar soap or tile cleaner.

Clean tiles with a wet sponge and wait till it dries.

Give the tiles a light sand and wipe away any debris wit a wet cloth or sponge.

Place masking tape around edges to keep paint off of fixtures and skirting boards.

Wait for the surface to dry before applying one or two coats of primer.

Give the primer a light sand when it’s finished curing.

Wipe away dust with a wet cloth and wait for it to dry.

Paint over tiles with selected tile paint.


adelaide tile painting